well cost guide

Well Water Filtration System Cost by Problem

By the Septic & Well Cost editorial team · Updated November 2026 · How we estimate

A whole-house well water filtration system often costs $800 to $4,000 installed. A multi-stage setup with sediment filtration, iron removal, a softener and under-sink reverse osmosis can cost $3,000 to $7,000.

SystemTreats mainlyTypical cost
UV systemBacteria and other microbes$350–$1,500
Water softenerHardness$800–$2,000
Iron or manganese filterIron, manganese$1,000–$3,500
Under-sink ROMany dissolved contaminants at one tap$150–$600
Whole-house ROMany dissolved contaminants$4,000–$10,000

Try the well pump calculator

Test before you buy

A sales pitch should not choose your system. Start with a certified water test, then buy treatment for the contaminants actually found. A softener, for example, reduces hardness but does not remove most other contaminants.

Common well water combinations

  • Rust stains: sediment filter plus iron removal
  • Scale and hard water: sediment filter plus softener
  • Bacteria concern: fix the source, then consider UV with pre-filtration
  • Drinking water concern: point-of-use reverse osmosis

Include yearly upkeep

Annual maintenance is commonly estimated at $50 to $300, and it can be higher for complex systems. Over 10 years, that adds $500 to $3,000. Ask for filter, media, lamp and salt costs before you buy.

Questions for the installer

  • Which lab result is this system designed to fix?
  • Is it certified for that contaminant?
  • What flow rate will my home get?
  • Does it discharge water, and where?
  • How will we confirm it worked?

Example 10-year system cost

This view helps when one system has a lower sticker price but expensive filters or media.

CostLowHigh
Whole-house system$800$4,000
10 years of upkeep$500$3,000
10-year total$1,300$7,000

Why order matters in a treatment train

Well water equipment is often installed in stages because one process protects the next. A sediment filter can stop particles from fouling later equipment. Iron can interfere with some softeners and UV systems if it is not handled first. UV works best with clear water, since particles can shield microbes from the light. Ask the installer to explain why each unit is placed where it is.

Warning signs in a water treatment sales pitch

A good installer should be comfortable basing the proposal on an independent lab result.

  • A free test run only by the seller, with no certified lab report
  • Pressure to sign on the same day
  • Claims that one machine removes everything
  • No written maintenance cost
  • No explanation of contaminant certification

Renting versus buying equipment

Some dealers offer rental or financing plans. Compare the full payment total against the purchase price, and ask who pays for filters and repairs, what happens if you move and whether there is a cancellation fee. A low monthly payment can cost more over time. For example, $60 a month for five years adds up to $3,600 before any fees, so compare that with the installed price of the same system.

Common questions

Do I need whole-house treatment?

It depends on the contaminant. Hardness and iron often call for whole-house treatment, while some drinking-water concerns can be handled at one tap.

Should I retest after installation?

Yes. A follow-up test is the best way to confirm the system solved the problem.

Prices are national planning ranges from the sources below and can differ from local quotes. Confirm rules with your local health department.

Related guides

Sources