well cost guide

Submersible Well Pump Replacement Cost

By the Septic & Well Cost editorial team · Updated November 2026 · How we estimate

Replacing a submersible well pump usually costs $1,000 to $2,500 installed. Deeper wells and a new pressure tank can push the total higher.

JobTypical installed cost
Shallow jet pump$400–$1,400
Submersible pump$1,000–$2,500
Pressure tank$800–$2,500
Pump and tank planning total$1,800–$5,000

Try the well pump calculator

Rule out cheaper problems first

A failed pressure switch, control box or pressure tank can look like a dead pump. Published well pump repairs often cost $250 to $1,100, so ask for a diagnosis before approving a new pump.

Why depth matters

A submersible pump must be pulled up from inside the well. Deeper jobs can need more labor, heavier equipment and possibly new wire or pipe. Our well pump calculator adds a planning increase for wells deeper than 300 feet.

Details your quote should include

  • Pump brand, horsepower and flow rate
  • Well depth and pump setting
  • New wire, pipe and fittings
  • Pressure switch or control box
  • Warranty on parts and labor

After the pump is replaced

Ask whether the well should be disinfected after the work. A water test after repairs is a sensible way to confirm the water is safe.

Signs the pump may be failing

Several of these symptoms can also come from wiring, a switch, a tank or a low water level, so a diagnosis should come first.

  • No water anywhere in the house
  • Pressure that keeps falling
  • Sputtering faucets
  • Pump running constantly
  • Higher electric bills without another explanation
  • A breaker that trips when the pump starts

What to do when the water stops

Check whether the breaker tripped and whether neighbors have an area power problem. Reset a breaker only once. If it trips again, stop and call a professional, because repeated resets can damage equipment or create an electrical hazard. Keep stored water for drinking and toilets while you wait, and ask about emergency service fees before approving a night or weekend visit.

Avoid buying the wrong pump size

A larger pump is not automatically better. If it pulls water faster than the well can supply it, the pump may run dry or cycle too often. Ask the contractor to base the pump on well yield, depth, household demand and pressure needs. Keep the model number, install date and warranty with your home records, since those details make the next service call easier.

Get the old pump’s details

Ask the technician to note the old pump’s age, size and setting depth when it comes out. Sand or heavy wear can point to a well problem that a new pump alone will not fix.

Common questions

Should I replace the pressure tank at the same time?

Only if it has failed or is near the end of its life. Ask the installer to test it first.

Can I replace a submersible pump myself?

It involves heavy equipment, electrical work and contamination risk, so most homeowners should hire a licensed professional.

Prices are national planning ranges from the sources below and can differ from local quotes. Confirm rules with your local health department.

Related guides

Sources