well cost guide
Well Pressure Tank Replacement Cost by Size
Well pressure tank replacement often costs $800 to $1,500 installed. Larger tanks can reach $2,500 or more, especially when valves or a pressure switch also need replacing.
| Tank size | Installed cost |
|---|---|
| 80–99 gallons | $600–$1,800 |
| 100–119 gallons | $850–$2,300 |
| 120–139 gallons | $900–$2,500+ |
Signs your pressure tank is failing
- Water pressure surges or drops
- The pump turns on and off rapidly
- Visible leaks around the tank
- Unusual noises from the system
Do not assume it is the pump
A failed pressure tank can act much like a failing pump. Rapid on-off cycling can also shorten the pump’s life, so a timely tank repair may help you avoid a larger well pump replacement.
Small parts that change the quote
| Add-on | Typical cost |
|---|---|
| Service or diagnostic visit | $75–$200 |
| Pressure switch installed | $100–$300 |
| Gauge or valve | $30–$150 |
Choosing the right size
Bigger is not always better for every home. The right size depends on your pump flow, household demand and available space. Ask the installer to explain how the tank will limit pump cycling.
A quick check you can ask a pro to perform
A bladder tank holds a cushion of air. A technician can shut off the pump, drain the system and check the air charge with a gauge. If the tank will not hold pressure, or water comes from the air valve, the bladder may have failed. Because the tank connects to electrical and water systems, have someone qualified do the work if you are unsure.
Repair or replace?
| Finding | Likely next step |
|---|---|
| Air charge is low but holds | Recharge and monitor |
| Pressure switch is failing | Replace the switch |
| Water at air valve | Replace tank |
| Tank body is leaking | Replace tank |
Compare the whole job
Ask whether the quote includes draining the old tank, disposal, fittings, a gauge, a pressure switch and testing after installation. If you already expect to need a pump soon, ask whether doing both at once would reduce labor. Do not replace a working pump only to save a future trip unless there is evidence that it is near failure.
What short cycling means
Short cycling is when the pump starts and stops every few seconds or minutes while water is running. A healthy tank stores enough water under pressure so the pump can run for longer, less frequent cycles. When the air cushion is lost, the tank stops doing that job and the pump takes the strain. If you hear the pump clicking on and off during a shower, or see the pressure gauge swing quickly, turn it into a service call soon. Catching the problem early is usually much cheaper than waiting for the pump motor to burn out.
Where the tank is installed matters
A tank in an open basement is usually simpler to replace than one in a crawl space, buried vault or tight closet. Tell the contractor where it is before they quote, and send a photo if possible. Also ask whether freezing is a risk at that location.
Common questions
How long does a pressure tank last?
It varies by tank quality, water conditions and pump cycling. Test it when symptoms appear instead of relying on age alone.
Can a pressure tank be repaired?
Air charge and fittings can sometimes be corrected. A leaking tank or failed bladder usually needs replacing.
Related guides
- Submersible Well Pump Replacement Cost
- Well Inspection Cost: Inspection and Water Testing
- Well Water Filtration System Cost by Problem